EDS-1791-N-250-000 贺德克 hydac

EDS 1700

Available versions:
Standard

With its integrated pressure measurement cell, the EDS 1700 provides the user with a 4-character display and the 4 switching outlets with all of the advantages of a modern electronic pressure switch. 4 switching points and reset points can be set independently of one another very easily by means of a foil keyboard. For optimum integration in monitoring systems (e.g. with SPS), an analogue output (4 ... 20 mA or 0 ... 10V) is available for integration in monitoring systems (e.g. with SPS). The main areas of application of the EDS 1700 are in the area of hydraulics and pneumatics. The device is used ideally wherver frequent switching procedures (several million), continuous switching point accuracy or simple and precise setting capability are required.Integrated pressure sensor with DMS on stainless steel diaphragmAccuracy 0.5% or 1% FS4-character digital displaySimple handling through key programming4 limit value relays, switching points and reset points can be adjusted independently of one anotherAnalogue output signal can be selectedMany helpful additional functionsInstallation position can be selected (pressure connection below/above, keyboard and display can be rotated by 180°)Adjustment of any display areas for the depiction of the measurement values, e.g.: in kN, kg, psi, ...

 

翻译：

可用版本:
标准

综合压力测量细胞,EDS 1700为用户提供了一个4-character显示和4开关插座的现代电子压力开关的优点。 4切换点和重置点可以设置独立于彼此很容易通过箔键盘。 *优集成监控系统(如与SPS),一个模拟输出(4… 20 mA或0… 10 v)可用于集成监测系统(如与SPS)。1700年EDS的主要应用领域是液压和气动领域的。 所使用的设备是理想的地方频繁切换程序(几百万),连续开关点准确性或简单的和精确的设置功能是必需的。集成压力传感器与DMS不锈钢隔膜准确性0.5%或1% FS4-character数字显示通过关键编程简单处理4极限值继电器,开关点和重置点可以独立调整模拟输出信号可以选择许多有用的附加功能可以选择安装位置(低于/高于压力连接,键盘和显示器可以旋转180°)调整任何显示领域描述的测量值,如 :在kN,公斤,psi,…