防冻液 Water Tank Anti-Freeze Protector NET:2L
本产品集冷却、防冻、防沸、防腐等功能于一体,
品质优良,性能可靠,能为内燃机冷却系统提供全面及*佳的保护。
性能与用途:
·冷却发动机,保证发动机正常运转;
·防止结冰,以免冻裂发动机缸体及水箱;
·防止发动机过热,并减少蒸发损失;
防止腐蚀发动机及各金属部件。
使用范围:
冰点要求在零下25℃以上,沸点要求在107℃以下。
使用方法:
1.待发动机冷却后,打开阀门,完全放出原水箱水;
2.用水冲洗水箱,若用水箱清洁剂效果更佳。水箱冲洗干净后,彻底放尽冲洗水;
3.加入防冻液,*低气温达零下25℃的使用地区宜直接加入,不用稀释。
注意事项:本品切忌吞服。如不小心溅入眼内应立即用清水冲洗;勿让儿童接触;每年更换一次防冻液。
This product is a combination of cooling, anti-freeze, anti-boiling, and anti-corrosion features. It is an excellent reliable product for an overall protection of the cooling system of an internal combustion engine.
Characteristics:
·Cool the engine to ensure its normal operation. ·Prevent freezing, which can cause cracks in an engine body and water tank. ·Prevent overheating and reduce the loss caused by vaporization. ·Prevent corrosion to various metal parts of an engine.Temperature Range: Above-25℃ and below 107℃.
Application:
1. Wait till the engine cools down, open the valve and discharge the water in the water tank. 2. Wash the water tank clean with water. For better result, wash with water tank cleaner. Discharge the water inside the tank. 3. Add this anti-freeze protector into the water tank. In areas where the lowest temperature is -25℃, just pour this product into the tank without diluting.Caution:
·Don`t swallow this product. When it is splashed into eyes, wash immediately with clean water. ·Keep it away from children. ·Replace the Anti-Freeze Protector once a year.