未核实，仅供参考项目 | DEscriptION | UNIT | BL200EK | ||
国际标准规格 | International specification |
| 840/2000 | ||
注射部分 | |||||
螺杆直径 | Screw diameter |
| A | B | C |
mm | 45 | 50 | 55 | ||
螺杆长径比 | Screw ratio |
| 22.5 | 20 | 18 |
理论注射容积 | Theoretical injection capacity | cm3 | 400 | 490 | 600 |
注射量 | Shot weight(PS) | g | 370 | 455 | 550 |
oz | 12.9 | 15.9 | 19.3 | ||
*大注射速度 | Injection piston speed | mm/s | 105 | ||
注射速率 | Injection rate | g/s | 154 | 190 | 230 |
注射压力 | Injection pressure | Mpa | 211 | 171 | 141 |
射胶行程 | Injection stroke | mm | 250 | ||
*大螺杆转速 | Max. Screw speed | r/min | 205 | ||
锁模部分 | |||||
锁模力 | Clamping force | Ton | 204 | ||
kN | 2000 | ||||
开模行程 | Opening stroke | mm | 530 | ||
拉杆内间距 | Space between tie bar | mm×mm | 560×510 | ||
*小模具厚度 | Min. mould height | mm | 220(175) | ||
*大模具厚度 | Max. mould height | mm | 570(525) | ||
*大模板距离 | Max. distance Platen | mm | 1090 | ||
顶出行程 | Ejector stroke | mm | 150 | ||
顶出力 | Ejector force forward | kN | 62 | ||
顶针回缩力 | Ejector force back | kN | 36 | ||
顶出杆数 | Number of ejector bar | PC | 9 | ||
动力电热 | |||||
系统压力 | Sys. Pressure | MPa | 16 | ||
电机功率 | Pump Motor | kW | 24 | ||
电热功率 | Heater power | kW | 13 | ||
温控区数 | Number of temp. control zones |
| 4+1 | ||
其他 | |||||
油箱容量 | Oil tank capacity | L | 280 | ||
机械外形尺寸 | Machine dimensions(L×W×H) | m×m×m | 5.5×1.45×2.15 | ||
机器重量 | Machine weight | Ton | 6.0 | ||
