专业供应小型升降平台液压动力单元

简介General Description
此液压动力单元专为中、小型升降平台设计，由高压齿轮油泵、
交流电机、多用集成块、液压阀、油箱等零部件有机结合为一体，
升降平台的下降由电磁卸荷阀卸荷控制，下降速度由由内置式平衡
阀控制。
This power unit is designed exclusively for the sclssors lifting table,
Consisting of high pressure gear pump，AC motor，multi-functional
manifold,valves, tank。The .lowering movement is activated by the
solenoid valve and the speed controlled by the pressure compensated
flow valve。
型号规格说明Model Specifications
型号
Model 电机电压
Motor Volt 电机功率
Motor power 名义转速
Rated Speed 油泵排量
Displacement 溢流阀压力
System pressure 油箱容量
Tank Capacity L
(mm)
JBZ-F1.6B3G2/GCABD1
220VAC
1.5KW
2800RPM 1.6mL/r 20MPa 5L 575
JBZ-F2.1B3G2/GCAED1 2.1mL/r 16MPa 6L 625
JBZ-F2.5C3G2/GCAED1 2.5mL/r 12MPa 8L 675

JBZ-F2.1C4H2/GCAED1
380VAC
2.2KW
2880RPM
2.1mL/r 20MPa 8L
JBZ-F2.5D4H2/GCABD1 2.5mL/r 16MPa 10L 745
JBZ-F2.7E4H2/GCAED1 2.7mL/r 15MPa 12L 845
说明Remark：
1.如需不同流量的泵、压力、电机功率等系统参数，请查看液压动力单元型号说明。
Please go to page 1 or consult our sales engineer for the different pump displacement,motor power or tank capacity.
2.如需手动应急放油装置，请在订货时说明。
The manual override function is available on request.
注意事项Special Notes
1.此动力单元不可连续运转，（1分钟ON，9分钟OFF）可重复工作。
1.The power unit is of S3 duty,which can only be worked intermittentiy,ie.,1 minute on and 9 minutes off.
2.安装前必须保证油缸、油管、接头等液压元件清洁无任何杂质粘附。
2.Clean all the hydraulic parts concemed before mounting the power unit.
3.液压油粘度应为15-68CST，应清洁无杂质，推荐使用N46号液压油。
3.The viscosity of the oil shoud be 15-68 cst.
4.系统使用第一个100小时后，应更换液压油，以后每3000小时更换一次液压油。
4.Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours
5.本液压动力单元适用于水平安装。
5.The power unit should be mounted horizontally.