The lifting device adjusts according to the bottle height.
Little water consumption collects water for reuse.
Filling: 1. Pre-evacuation button: this button controls the bottle pre-evacuation work before beer filling.
2. Air-discharge button: this button controls the air discharge after beer filling finished.
3. When there is no bottle in the filling valve, there is button will not order the pre-evacuation button to evacuation. That is, this button control the process of “no bottle, no evacuation work” to keep the high evacuation rate when there is bottles in the filling valve.
4. Beer distributor: When the beer is filled into the bottle, beer will pass this distributor so that beer flows from the bottle inside wall to reduce foam.
Capping: Most advanced technology, seal the bottle excellently.
Fill cap as soon as the bottle is transmitted to the capping position.
Infared ray inspect the cap avoid no caps.
Beer tank: Adopted the special device to keep well the stability of liquid level and CO2 pressure. In addition, in the small factory the open and close valves of this machine are mechanical control. But, our open and close valve are all controlled by cylinder(AIRTAC), which keep the work stable and make the machine work long life. Meanwhile, our machine has the high-pressure foaming device. You know, before capping, the filled bottle will run a distance opening the mouth. once the bottle is finished fill, this foaming device will arouse the foam in the top of the beer in the bottle by the aseptic water to keep from germs into beer.
Control cabinet: The control components, PLC and wires are the most famous brand such as Siemens, Mitsubishi.
Basic Parameters:
Rinsing heads 24
Filling heads 24
Capping heads 8
CO2 consumption 120g/100L
Main motor 4.5kw
Rinsing water pressure 0.06 MPa < P ≤ 0.2 MPa
Pressure of Liquid tank ≤0.45Mpa
Weight 5000kgs
Outer 3250×2500×2750mm
Co2 consumption 260g/100L
Main configuaration
Main motor: Chinese famous brand;
PLC, frequency convertor: Mitsubishi, Japan;
Connector, proximity switch: Omron, Japan;
Cylinder, electromagnet valve: Schneider