加工定制:是 | 类型:其他 |
额定发热电流:10mA(A) | 机械寿命:50000(次) |
产品认证:ROHS | 用途:数码产品 |
10:10 |
贴片拨轮开关,拨轮开关厂家,大手柄拨轮开关:TS-001
1.General Characteristics 一般特性
1.1 Application:This specification is applied to secondary circuit lever switch push–mechanism used for general applications。
适用范围:该规格书适用带按键功能摇头开关。
1.2 Operating Temperature Range:–10oC to +60oC
使用温度范围: –10oC to +60oC
1.3 Operating Temperature Humidity: ≤85% at +40oC
相对湿度: ≤85% at +40oC
1.4 Test Conditions:Unless otherwise specified, the atmospheric conditions for making measurements and tests are as follows:
实验条件:若没有特别说明,则试验大气条件如下:
Ambient Temperature: 5–35oC
Relative Humidity: 45–85% RH
Air Pressure: 86–106Kpa(860–1060mbar)
环境温度: 5–35oC
相对湿度: 45–85% RH
大气压力: 86–106Kpa(860–1060mbar)
2 Appearance , Structure & Dimensions 外观 , 结构及尺寸
2.1 Appearance: The encoder shall have good finishing , and no rust , crack of plating defects 。
外观:产品外观良好,无锈蚀、裂纹和镀层缺陷。
2.2 Structure & Dimensions :Refer to individual product drawing 。结构及尺寸:参见产品图纸
2.3 Markings :Refer to individual product drawing 。标识:参见产品图纸
3. Ratings 额定值: 10mA 5VDC ( Each bit )