产品图片 |
|
产品特点 |
1.本机为烫金行业中新设计的机型,改变了以往用气压
在机械中出现的压力不均匀之现象,此机种的优点是
压力稳定,定位精准、可自动烫金。
2.此机采用滑道型,精度高,斜面及垂直度可控制在
0.02mm以内,上模有发热控制.公差上、下为1℃,
液晶显示,机旁设有一个步进电机,可自动烫金,
收料和送料。
3.安全操作,双手按钮,急升保护,机台可加装光电护手。
Features of Design
1.This machine is that gilding industry is hit by newly
designed model,phenomenon of having changed the pressure
using pressure to appear in machinery in the past unevenly,
the merit that this machine grows is pressure stability,
but automation gilding.
2.This machine adopt four post types , accuracy height , the
flat surface and the perpendicularity spend but the fever
heat controls within 0.02 mm , a model to have controls.
Time is 1 ~C , liquid crystal shows on the common difference,
set up the have a step-by-step electric motor, but automatic
gilding , collect material and the pay-off by the
side of machine.
3.Safe operation , the both hands button, quickly rise
protection , machine may add dress photoelectricity hand
建议您和我们联系,也许能找到更适合你的机器,因为我们有定制业务,更重要的是我们很专业!!!
|
技术参数 |
电源电压:AC380V 50-60HZ 总功率400W 工作台尺寸:12090(mm) 压合*大高度:60mm |
气源气压:0.5Mpa
|
生产能力3000双/8小时 |
|
联系方式 |
联系地址:温州市瓯海区 联系电话:15067759981 传真号码:057789736980 腾讯QQ:873147345 阿里旺旺:wzcfjxsb MSN:gnefgnipnehc88@yahoo.cn |