螺旋洗砂机2816型贵州螺旋洗砂机

洗砂机

 我公司生产的XSD系列洗砂机是一种轮斗式洗选设备，可清洗分离砂石中的石粉泥土，其新颖的密封结构，可靠的传动装置，确保了清洗脱水的效果，是配合制砂机使用的一种高效

洗砂设备。                             
     

洗砂机广泛应用于建筑工地、砂石厂、水电站混凝土大坝工地等多种行业、，洗砂机具有洗净度高，结构合理，处理量大，功耗小，洗砂过程中砂子流失少，尤其是洗砂机传动部分均与水、砂隔离，故其故障率大大低于目前常用洗砂机，竖内洗砂行业升级换代的比较佳选择。
     

洗砂机工作原理：
     洗砂机工作时，电机通过三角带、减速机、齿轮减速后带动叶轮缓慢转动，砂石有给料槽进入洗槽中，在叶轮的带动下翻滚，并互相研磨，除去覆盖砂石表面的杂质，同时破坏包覆砂粒的水汽层，以利于脱水；同时加水，形成强大水流，及时将杂质及比重小的异物带走，并从溢出口洗槽排出，完成清洗作用。干净的砂石由叶片带走，比较后砂石从旋转的叶轮倒入出料槽，完成砂石的清洗作用。

洗砂机规格与性能参数表：

Sand Washing Machine:
This series XSD Sand Washing Machines are a kind of water washing style equipment to be matched with the sand making machine and can reduce the dust and stone powder which mixes with the final sand, so sand making machine can improve the quality of the sand. XSD series Sand making machine is used in building plant, quarry, concrete plant, dam building, casting-70 sand, glass factory’s quartz sand and refilling pressure sand.

Working Principle of Sand Washing Machine:
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

Characteristics of Sand Washing Machine:
Reasonable structure, large capacity, low consumption, little loss of the sand during the washing process, low failure rate.

Main Technical Parameter: