未核实，仅供参考TM-105-F系列热压鼓包机油压机特点：
1． 采用四柱三板式结构，活动板与工作面平行精度高，四个精密导套使下压垂直精度高。
2． 油缸采用可调式，下死点定位精度高，重复精度达到0.01mm；
3． 设备液压组合在机架内部，结构紧凑，外形美观大方；
4． 工作台下方装有脚轮和脚杯，可轻便移动，省力高效；
5． 另可选上下模板增加发热装置和进口智能温控器，温差可精确到±1度，上下模温度可分开控制，操作方便；
6． 另可选中间范本增加测力传感器及显示器，精确显示产品受力状况，达到所需工作目的；
7． 另可选增加电子尺或光栅尺及显示器，精确显示油缸位移状况，达到所需工作目的；
适用范围：
1． 各类手机或遥控器硅胶、塑料按键冲切，塑料制品整切分切；
2． 各种手机、数码相机、手提电脑液晶显示屏保护膜裁切，各种不干胶、商标等的精切，切半断等；
3． 各类PV、PE、PC等薄膜开关、薄膜面板打凸鼓包、成型等；
4． 各种手提电脑键盘软性电路线路压合成型等。
出力 3T 10T 15T
发热尺寸 500*240 500*240 500*240
大工作高度 210 210 260
油缸行程 100-150 100-150 100-150
发热功率 4.8 4.8 4.8
Features:
1. Adopts four-column and three-plate structure, the active plate paralleling with the working surface in high precision, four precise guide sleeves leading to highly precise down-pressing plumb.
2. The cylinder being adjustable, the lower dead point positioned in high precision and the repeating precision up to 0.01mm;
3. The equipment hydraulic unit is set inside the frame, compact and elegant;
4. Under the working platform is installed with the caster and foot cup, allowing the press to move conveniently and be operated in a laborsaving and high-efficient way.
5. The upper and lower templates can be additionally adopted to add heating device and imported intelligent temperature controller; the temperature difference can be as precise as ±1℃; the upper and lower templates can be controlled separately to allow for convenient operation;
6. The middle template can be additional adopted to add force transducer and display to precisely display the force imposed on the product so as to complete the undergoing work;
7. The electronic ruler or grating ruler and display can be additionally added to precisely display the situation of the oil cylinder displacement so as to complete the undergoing work.
Scope of Application:
1. Die cutting of the silicagel and plastic buttons of vsrious handsets or remote control, whole or partial cutting of plastic products;
2. Cutting of protective film of LCD screen of various handsets, digital cameras and notebook computers, precise cutting and half cutting-off of various adhesive tapes and trademarks;
3. Raising,bulging and forming of various film switches and film plates made of PV, PE and PC,etc;
4. Pressing and forming of flexible circuits and lines of keyboards of various notebook computers.
